Field notes · Exposure

How to read false color on iPhone.

Your eyes are a poor light meter. Screens change brightness, sunlight washes them out, and Apple Log looks flat on purpose. False color fixes this by replacing the picture with a map of exposure: every pixel is painted by how bright it really is, so a correctly exposed face is always the same color no matter where you're standing. Here is how to read it, and a five-step routine for getting exposure right every time.

Monitoring only · never recorded Reads the Apple Log signal Works under any look

What false color actually measures

A normal preview shows you a rendering of the scene: the camera's guess at how the footage might look, squeezed into whatever your screen can display. False color skips the rendering and reports the recorded signal directly. Each band of brightness gets a fixed color, measured in stops from middle grey, the 18% grey card that every exposure system is built around. A grey card, a mid-tone wall or a face in the right band tells you the exposure is correct, whether the sun is in your eyes or you're in a dark room.

On iPhone this matters more than on most cameras, because Apple Log keeps several stops of highlight detail that the preview cannot show. A sky can look blown out on screen while the file is perfectly fine. The preview lies; false color doesn't.

The scale, color by color

Tournage's scale runs from black to clipped, left to right. The two colors to learn first are green (middle grey) and pink (the skin band); everything else is context around them.

FALSE COLOR · EXPOSURE KEY DARKER ← → BRIGHTER Deep skin Medium Light skin Black Deep shadow Shadows MID GRAY ★ SKIN Upper mids Bright · safe Near clip CLIPPED no detail 5+ stops under −5 to −⅓ stop ±⅓ stop +½ to +1½ to +2½ +2½ to +4½ last stop no detail UNDEREXPOSED SAFE · DETAIL EVERYWHERE CLIPPING Put your subject's mid-tones in green Yellow is safe: the detail is in the file Red is gone: lower exposure if it matters Blue/purple: noisy or black, add light Pink: the skin band — only skin-colored areas can turn pink; put faces here
Stops are measured from middle gray (an 18% gray card). Red is calibrated to where the iPhone's sensor actually clips, checked per color channel, so a saturated light that clips only one channel still shows red.
ColorExposureWhat it means on set
PurpleBlack, no detailPure black in the file. Fine for a deliberate silhouette or a night sky; a problem on anything you want to see.
Blue5 stops under and moreShadows that will be noisy. Add light, open the shutter angle, or raise ISO.
Dark grey−5 to −⅓ stopHealthy shadows with detail. Most of a moody scene lives here.
GreenMiddle grey, ±⅓ stopThe anchor. A grey card, a mid-tone wall or a medium jacket in green means you're exposed correctly.
Pink+½ to +1½ stops, skin-colored onlyThe skin band. Only skin-colored pixels can turn pink; a wall at the same brightness stays light grey. Get a face into pink and its exposure is right.
Light grey+⅓ to +2½ stopsUpper mid-tones: bright walls, pale clothing, overcast sky.
Yellow+2½ to +4½ stopsBright but fully recorded. Not a warning on Apple Log; that detail is in the file for grading.
OrangeThe last stopOne stop from clipping. Fine for a lamp or a sky you don't care about; risky for anything you do.
RedClippedThe sensor saturated and no detail is left, checked per color channel. Expected on light sources and shiny reflections; never on faces, clouds or white clothing.

Exposing a face

Faces are where false color earns its place. The cinema-monitor convention, which Tournage follows, puts well-exposed light skin in the pink band, about a stop over middle grey. Medium and olive skin straddle pink and green. Deep skin belongs in green or just below it, in the dark-grey band, and that is correct exposure, not under-exposure. The one rule for every skin tone: keep faces out of yellow, and never let one fall into blue.

The quickest fix is not the ISO slider. Leave exposure on auto and use exposure compensation: in Tournage, tap ISO or SHUTTER while it's on AUTO and the panel shows an EV dial. Pull it to −⅓ or −⅔ to bring a bright face down into its band, or push it positive for a backlit subject. Auto keeps tracking the scene; you've just told it where the face belongs.

Because Tournage's skin band is color-aware, it also catches the classic mistake of exposing for the background: if a person is standing in front of a bright wall, the wall reads light grey or yellow while the face reads green or dark grey. That gap is your cue to add light or move the subject, not to crank exposure until the wall clips.

Highlights: when red is fine and when it isn't

Red is the only color on the scale that means gone. Tournage calibrates it to where the iPhone's sensor actually saturates in Apple Log, checked channel by channel, so a saturated colored light that clips only its red channel still reads red. Light sources, specular reflections on chrome or water, and the sun are expected to clip; they're brighter than any sensor can hold, and chasing them ruins the rest of the frame. Clouds, skin, white shirts and wedding dresses are not allowed to be red. If they are, bring exposure down until they drop to orange or, better, yellow.

Yellow deserves a second mention because it trips up people coming from older cameras: on Apple Log, yellow is good. It's the headroom you paid for. Trust it.

Shadows: noise versus black

Blue tells you a region will be noisy when graded; purple tells you it's black and nothing will bring it back. A silhouette against a window is supposed to be purple. A face in a dim interior should not be blue. The fixes, in order of how much they cost you: add light, widen the shutter angle, raise ISO. If none of those are possible, accept the noise and protect the face; a slightly noisy face beats a clean one you can't see.

A five-step routine

  1. Frame first. Composition before exposure; moving the subject changes the light.
  2. Turn on FALSE and look only at the thing that matters, usually the face. Ignore the rest for now.
  3. Put the face in its band: pink for light skin, pink-to-green for medium, green for deep. Use EV compensation on auto, or ISO and shutter in manual.
  4. Check the edges. Is anything you care about red? Any face in blue? Adjust light or framing before adjusting exposure again, so the face stays put.
  5. Turn FALSE off and roll, or leave it on while you shoot: it's monitoring only and is never recorded. Zebras are the lighter-weight alternative once you trust your exposure.

False color, zebras or histogram?

Tournage's false color and zebras both read the Apple Log signal rather than the graded preview, so they stay accurate under any look or LUT. The full key, with every band and threshold, is in the field guide.

Questions

False color questions, answered.

Does false color change my recording?
No. False color is a monitoring overlay only. It paints the live preview by exposure level and never touches the file — your take records exactly as if it were off. In Tournage it reads the raw Apple Log signal underneath whatever look you have on screen.
Which color should a face be in false color?
Light skin, correctly exposed, sits in Tournage's pink skin band, about half a stop to a stop and a half above middle grey. Medium and olive skin straddle pink and green; deep skin belongs in green or just below it. Keep every face out of yellow and never let one fall into blue.
Why is my sky showing red?
Red means the sensor has clipped — at least one color channel has no detail left to recover. Bright skies, lamps and shiny reflections often read red and that can be an acceptable creative choice; clouds, faces and white clothing should not. Pull exposure down until the thing you care about leaves red (and usually orange).
Is yellow a warning?
Not on Apple Log. Yellow means bright but fully recorded: Apple Log holds several stops of highlight detail above what the normal preview can show, so a sky can look blown out on screen while false color correctly reads yellow. That detail is in the file for grading. Orange is the last stop before clipping; red is clipped.
Can I use false color with a look or LUT on?
Yes. Tournage's false color measures the recorded Apple Log signal, not the graded preview, so the reading is accurate under any look. Zebras work the same way. The histogram is the exception: it follows what's on screen, with a tap to switch it to the neutral Rec.709 reading.
Is Tournage's false color the same as ARRI or Blackmagic's?
The idea is identical and the conventions overlap — green for middle grey, pink for skin, red for clipping — but every manufacturer defines its own bands and reference levels. Tournage's scale is measured against where the iPhone sensor actually clips in Apple Log and is documented in full in the field guide, so the colors you learn here are the colors on the camera you actually use.
Never miss the moment

Exposure you can trust, on the camera in your pocket.

Tournage: 4K Apple Log ProRes, sensor-calibrated false color with a skin band, crash-safe recording. $19.99, once.

Get Tournage