Of all the numbers on a cinema camera, shutter angle is the one that most separates footage that feels like film from footage that feels like a phone. It controls motion blur, it changes with frame rate in a way shutter speed never did, and on an iPhone it carries extra weight because there's no aperture to lean on. Here's the whole subject in one sitting.
Film cameras exposed each frame through a spinning disc with a wedge cut out. The size of that wedge, in degrees, set how long each frame saw light: a 180° shutter is a half-disc, open for half of every frame's time. The vocabulary stuck because it describes the thing that matters to the eye, what fraction of each frame is exposed, rather than an absolute time. Convert it when you need to:
Half of every frame exposed, half not: that's the look cinema audiences have absorbed for a hundred years. Moving things blur just enough to read as continuous motion without smearing. It's a default, not a commandment, but it's the right default, and it's why Tournage highlights 180° in gold among the presets and gives the slider a distinct click there.
| Frame rate | 180° shutter | Typical use |
|---|---|---|
| 24 fps | 1/48 s | Cinema, narrative, music video |
| 25 fps | 1/50 s | Broadcast in 50 Hz countries |
| 30 fps | 1/60 s | Web, social, documentary in 60 Hz countries |
| 60 fps | 1/120 s | Smooth motion, light slow motion |
| 120 fps | 1/240 s | Slow motion |
| 240 fps | 1/480 s | Extreme slow motion |
Notice what the angle buys you: the blur stays consistent as the frame rate changes. Switch to 120 fps for a slow-motion shot and 180° silently becomes 1/240 s, so when it's slowed down it still looks like film. Thinking in shutter speed, you'd have to recalculate every time; thinking in angle, you don't.
On a cinema camera, exposure is a three-way trade between shutter, ISO and aperture. An iPhone's lenses have a fixed aperture, so you have two controls, and the shutter is spoken for by the look you want. That leaves ISO, and ISO has a floor. In bright daylight at 180° you'll hit the lowest ISO and still be over-exposed, which is why phone footage shot on auto in sunshine so often has that stuttery, video look: the camera rescued the exposure with a very fast shutter, and the motion blur went with it.
The fix is the one real cameras use: a neutral-density filter on the lens, ideally a variable ND, so you can keep 180° and bring the light down instead. Indoors and at night the problem reverses and the trade is between a wider shutter angle and a higher ISO; Tournage's false color and the dBFS-style honesty of its scopes tell you which one you can afford.
LED and fluorescent lights pulse with the mains electricity: 100 times a second in 50 Hz countries, 120 in 60 Hz countries. If your shutter time doesn't line up with that pulse, you get rolling bands or a pulsing brightness in the footage. The cure is a shutter time that's a whole multiple of the pulse:
Europe, the UK, Australia, most of Asia and Africa. Use 1/50 or 1/100 s. At 24 fps that's 172.8°, the odd-looking preset in Tournage's shutter panel; at 25 fps, plain 180°.
The Americas, Japan's east, South Korea, Taiwan. Use 1/60 or 1/120 s. At 24 fps that's 144°; at 30 fps, 180° lands on it exactly.
Daylight doesn't flicker, so outdoors you can ignore all of this. Under practical lights, it's the first thing to check when a shot looks subtly wrong.
The other half of the exposure story, where to put your subject once the shutter is set, is in how to read false color; the format it all lands in is covered in Apple Log, explained.
Tournage: manual shutter angle with the 1/x shown, 4K Apple Log ProRes, false color, crash-safe recording. $19.99, once.
Get Tournage